다양한 테스트 전압을 사용할 수 있는 FLUKE 1507  및 1503  절연 저항 테스터는 다양한 문제 해결, 기기 가동,
사전 대처형 유지 관리 등의 용도에 적절한 제품입니다.      원격 프로브와 같은 기능들을 추가하면 반복적인 테스트를
수행하는데 필요한 시간이 줄어듭니다.

Fluke 1507은 고급 산업 및 전기 절연 테스트를 위한 최고의 휴대용 절연 테스터입니다.     빠르고 간단하게 고급 절연
저항테스트를 수행할 수 있는 모든 기능들을 갖추고 있습니다.   또한 크기가 작아 쉽게 휴대 및 사용할 수 있고 가격도
매우저렴합니다.기본적인 전기 절연 테스트에는 대부분의 일반적인 테스트를 수행할 수 있는 저렴한 휴대용 도구인
Fluke 1503을 사용하십시오.

AC/DC Voltage Measurement
Accuracy
Range 600.0 V
Resolution 0.1 V
50 Hz to 400 Hz ± (% of Rdg + Digits) ± (2 % + 3)
Input impedance 3 MΩ (nominal), < 100 pF
Common mode rejection ratio (1 kΩ unbalanced): > 60 dB at dc, 50 or 60 Hz
Overload Protection 600 V rms or dc
Earth bond resistance measurement
Range/Resolution 20.00 Ω 0.01 Ω
200.0 Ω 0.1 Ω
2000 Ω 1.0 Ω
20.00 kΩ 0.01 kΩ
Accuracy ± (1.5 % + 3)
Overload Protection 2 V rms or dc
Open Circuit Test Voltage > 4.0 V, < 8 V
Short circuit current > 200.0 mA
Insulation specifications
Measurement Range 1507: 0.01 MΩ to 10 GΩ
1503: 0.01 MΩ to 2000 MΩ
Test voltages 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
1503: 500 V, 1000V
Test Voltage Accuracy + 20 %, - 0 %
Short circuit current 1 mA nominal
Auto Discharge Discharge time < 0.5 second for C = 1 µF or less
Live circuit indicator
Inhibit test if terminal voltage > 30 V prior to initialization of test
Maximum Capacitive Load
Operable with up to 1 µF load
Measure Accuracy:
50 V: ±(3 % + 5)
100 V: ±(3 % + 5)
250 V: ±(1.5 % + 5)
500 V: ±(1.5 % + 5)
1000 V: ±(1.5 % + 5) to 2000 MΩ, ±(10 % + 3) above 2000 MΩ
General Specifications
Maximum voltage applied to any terminal: 600 V ac rms or d
Storage Temperature -40 °C to 60 °C (-40 °F to 140 °F)
Operating Temperature -20 °C to 55 °C (-4 °F to 131 °F)
Temperature Coefficient 0.05 x (specified accuracy) per °C for temperatures
< 18 °C or > 28 °C (< 64 °F or > 82 °F)
Relative Humidity
0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F)
0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F)
0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F)
Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
Shock 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
Electromagnetic compatibility:
In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)
Safety
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/
EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
Certifications:
CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
Batteries
Four AA batteries (NEDA 15A or IEC LR6)
Battery Life
Insulation test use:
Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature.
These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Resistance measurements:
Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room
temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.
Size 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)
Weight 550 g (1.2 lb)
IP Rating IP40
Altitude
Operating: 2000 m CAT IV 600 V, 3000 m CAT III 600 V
Non-operating (storage): 12,000 m
Over-range capability:110 % of range
Included accessories:
TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote
probe